2024 Vermeer® Stump Cutters SC70TX
- Year 2024
- Make Vermeer®
- Model Stump Cutters
2024 Vermeer® Stump Cutters SC70TX
2024 Vermeer® Stump Cutters SC70TX
Tough enough to withstand large stumps on a commercial jobsite.The SC70TX can fit into tight spaces in a residential area. The track system is designed to decrease ground disturbance. The SC70TX is equipped with safety features such as the patented capacitance-sensing operator presence system and wheel brake to help you feel confident on the job.
Features may include:
Operator presence system- The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.
- The ground drive speed helps transport the machine between stumps to increase productivity on the job.
- The SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.
- Gearbox drive cutter wheel system directs the maximum amount of horsepower to the cutter wheel for optimal jobsite productivity.
Motor
Motor Type
Integral motor and planetary unit
Drivetrain
Gearbox
Upper: Straight bevel | Lower: Straight bevel
Brakes
Brake System Type
Track: Integrated into motor/planetary unit | Spring-applied and hydraulically released dual parking brakes
Battery
Battery
950 CCA
Electric
Electrical
Shutdown System: High engine temperature and low oil pressure | System Voltage: 12
Operational
Operating Speed
High Travel: 2.6 km/h | Low Travel: 1.1 km/h | Cutterwheel: 948 rpm
Hydraulics
Maximum Pressure
System relief: 2900 psi (200 bar) | System relief: 206.8 bar
Ground Pressure
Bearing - Soft Ground: 29.6 kPa
Hydraulic Pump
Flow at Maximum RPM: 9 gpm | 34.1 L/min
Pump Type
Track Drive: Tandem gear pump, pressure balanced
Chassis
Chassis
Control Station Description: Swing-out | Operator Vision Shield Description: Abrasion-resistant coated polycarbonate
Frame Type
Track Frame Description: Tube and plate
Lights and Safety
Lighting
Warning: Engine faults
Dimensions
Dimensions
Chip Containment: .7 cu m| Cutterwheel Cut Below Ground: 40.6 cm | Cutterwheel Cut Above Ground: 68.6 cm | Cutterwheel Straight Line Dimension: 165.1 cm | Cutterwheel Diameter without Teeth: 58.4 cm | Cutterwheel Thickness: 2.8 cm | Track Type: 9-in (22.9-cm) rubber iron core
Length
359.7 cm
Width
129.5 cm
Height
182.9 cm
Track Width
Extended: 51 in | Retracted: 35 in
Track Length
on Ground: 51.2 in
Capacities
Oil capacity
1.6 L | Lower Gearbox: 2.1 L
Hydraulic Capacity
Tank: 36.3 L
Features
Weights
Weight
Engine Option One: 1769 kg
Features
Features
Number of Idlers: 10 | Display: Multifunction display (MFD); Displays - hours, fuel level, engine speed, engine faults and engine status | Driveshaft - U Joints: Two standard with double lip seal | Jackshaft Bearing Type: | Reversible Pockets: 30 | Directional Control: | Switches: Boom swing, boom height, creep propel, ignition, clutch, track gage, track speed range, SmartSweep, throttle | Controller: Vermeer C248 with SmartSweep | Quantity/Location: 2 | Sensor Type: Capacitive | Number of Pockets: 30 | Tooth Description: Yellow Jacket cutter system | Number of Teeth: 30 | Number of Indexes: 2 | Filtration Method: Full-flow 4 micron return filter, suction strainer | Cutterwheel Guard | Directional Control | Flow Control | Visual Interface | System Type: Tandem gear pump, pressure balanced | Driveshaft: 2 universal joints
Oil Type
SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | Recommended: Vermeer Hypower 68