2024 Vermeer® Stump Cutters SC802
- Year 2024
- Make Vermeer®
- Model Stump Cutters
2024 Vermeer® Stump Cutters SC802
2024 Vermeer® Stump Cutters SC802
Grind down the big jobs.Cut the big jobs down to size with the powerful 74 hp (55.2 kW) turbo-charged SC802 stump cutter. Between its patented AutoSweep® gear-drive cutter system and an impressive 103 in (262 cm) sweep arch and 60 in (152 cm) tongue extension, the SC802 makes short work of even big, tough hardwood stumps.
Features may include:
Rear deck containment area- Collect chips as you work in the 68 cu ft (1.9 cu m) containment area under the rear deck.
- Keep your distance when you opt for the remote control, which operates the cutter up to 100’ (30 m) away from the unit.
- Protect your investment with a 3-year/3000-hour extended limited warranty on applicable gearboxes and driveline, and a 1-year/1000-hour Vermeer equipment limited warranty.
Drivetrain
Gearbox
Upper Gearbox: Straight bevel | Lower Gearbox: Straight bevel
Suspension
Suspension
Rubber torsional axle
Brakes
Brake System Type
Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg)
Wheels & Tires
Tires, Front Specification
ST235/80/R16 load range G
Wheels
16 in x 6 in (40.6 cm x 15.2 cm) 6 bolt circle
Operational
Operating Speed
Cutterwheel: 881 rpm
Performance
Noise Level
Sound Power - Engine Option Two: 112.3 dB(a) | Sound Power: 108.0 dB(a)
Battery
Battery
950
Electric
Electrical
Shutdown System: Low oil pressure, high engine coolant temp | System Voltage: 12 Volt
Hydraulics
Maximum Pressure
System relief: 137.9 bar
Hydraulic Pump
Flow at Maximum RPM: 12.1 L/min
Chassis
Chassis
Manufacturer - Option One: Dexter
Hitch/Type
Pin, pintle, 2 1/6" (1.6 cm) ball
Frame Type
Description: Reinforced 4" (10.2 cm) square tubing
Lights and Safety
Lighting
Warning: Engine warning | Trailer Type: LED
Dimensions
Dimensions
Chip Containment: 1.9 cu m | Driveshaft - U Joints: Two standard with double lip seal | Tongue Extension: 60" (152.4 cm) | Cutterwheel Cut Below Ground: 63.5 cm | Cutterwheel Cut Above Ground: 88.9 cm | Cutterwheel Straight Line Dimension: 243.8 cm | Cutterwheel Diameter without Teeth: 71.1 cm | Cutterwheel Thickness: 2.4 cm
Length
424.9 cm | Tongue In: 424.9 cm | Tongue Extended: 234 in (594.4 cm) |
Width
202.7 cm
Height
200.7 cm
Capacities
Oil capacity
1.6 L | Lower Gearbox: 2.1 L
Hydraulic Capacity
Tank : 22.7 L
Features
Option One: 6000
Weights
Weight
Engine Option One: 1832.5 kg | Standard Gauges: MFD Multifunction LCD Display | Tongue - Engine Option Two: 172.4 kg | Engine Option One: 1995.8 kg | Tongue - Engine Option One: 208.7 kg
Features
Features
Display: Multifunction Display (MFD) | Operator Vision Shield Description: Abrasion-resistant coated poly carbonate | Tongue Description: Extendable | Control Station Description: Swing-out | Type - Option One: Weld-on | Driveshaft: Rubber dampened with 2 universal joints | Fender Description: Weld-on | Switches: Ignition, throttle and clutch | Controller: Operation with AutoSweep | Number of Pockets: 42 | Tooth Description: Yellow Jacket™ cutter system | Number of Teeth: 42 | Number of Indexes: 2 | Filtration Method: 6 micron full flow return filter; suction strainer | Cutterwheel Guard | Directional Control | Reversible Pockets | Toolbox Description | Flow Control | System Type: Gear pump, pressure balanced
Axle Bearing Extensions, Front
Rubber torsional axle
Oil Type
SAE 75W90 synthetic gear oil | Lower Gearbox: SAE 75W90 synthetic gear oil | Recommended: Vermeer HyPower 68